Home
 
 
My my My my
 
 
 
 
 
 

measure for: inside mount natural woven shades

 
  1. To find width: Measure width of window opening at three different places and use the narrowest dimension for ordering. A 1/2" deduction will be taken automatically for inside mount.
  2. To find height: Measure the height of window from top of opening to top of sill in two places. Use the longest dimension. If you prefer shade not to touch sill, deduct 1/4". If there is no sill, measure height to point where shade is to reach.
  3. To install the product flush with the window frame, a minimum window depth of 2" is required for custom shades and 2 1/4" for Trim&Go shades.
 

measure for: outside mount natural woven shades

 
  1. To find width: Measure the exact width of the area to be covered. It is recommended that 3" be added to the shade width for the standard overlap of 1 1/2" on each side.
  2. To find height: Measure the height of the area to be covered. Measure from the ceiling or desired point above the window to approximately 1 1/2" below the window frame. If there is no sill or if blind is to overlap window frame, measure to the point the shade reaches.